ANSI/ASABE AD6690:2007, Milking machine installations -
Mechanical tests, is an adoption with deviations of the identically titled
ISO standard ISO 6690:2007, Milking machine installations -
Mechanical tests. Deviations noted in the following Forward sections
pertain to those provisions where harmonization could not be achieved
between ASABE and the International Standard.
0.2 ANSI/ASABE AD6690:2007 specifies mechanical tests for milking
machine installations in order to verify compliance of an installation or
component with the requirements of ISO 5707, which has been adopted
with deviations by ASABE as ANSI/ASABE AD5707:2007. It also
stipulates the accuracy requirements for the measuring instruments.
This Standard is applicable for testing new installations and for periodic
checking of installations for efficiency of operation. Alternative test
methods may be applicable if they can be shown to achieve comparable
results.
Test procedures described in Annex A are primarily for testing in the
laboratory. An example of a field test procedure which can reduce the
time and effort involved in testing is given in Annex C and a
corresponding test report in Annex D.
| ANSI : | ANSI Approved |
| File Size : | 1
file
, 990 KB |
| Number of Pages : | 38 |
| Published : | 01/01/2011 |
